Home   |   Agreement   |   Partners   |   International   |   Tests   |   News   |   Glossary   |   Contacts   
 

Damman DTP 4536
Damman DTP 4536
Manufactured by: HERBERT DAMMANN GmbH
Category: crop protection sprayers - boom sprayers
ENTAM recognised: YES
Testing partner: JKI
Date: 2009
Recognition: On the basis of the ENTAM agreement this test report has been recognized by the ENTAM Members (ENTAM recognition n. 29/2009) with the following recognition numbers:

Austria - FJ-BLT HBLFA Francisco Josephinum Wieselburg – Biomass, Logistics, Technology: 041/09
Denmark - AU/DAE - University of Aarhus - Department of Agricultural Engineering Sciences: AU/DAE/ENTAM 2009-11
France - Cemagref: CEMAGREF/ENTAM/09/022
Greece - I.A.M.C. Institute of Agricultural Machinery and Constructions: ΛE/119/01/ZZ
Hungary - MGI Mezogazdasági Gépesítési Intézet: D-19/2009
Italy - ENAMA Ente Nazionale per la Meccanizzazione Agricola (Italy)ENTAM „Rapporto di prova prestazionale“ 14/2009
Poland - PIMR Przemyslowy Instytut Maszyn Rolniczych: PIMR-42/ENTAM/09
Spain - CMA Centre de Mecanització Agrŕria EPH 004/09
Switzerland - ART Forschungsanstalt Agroscope Reckenholz-Tänikon: D-27.09
Test documentation: DAMMAN_DTP4536_ENTAM_recognition29_2009.pdf
Additional information and notes: Sprayer type: Built on field crop sprayer
Trade mark: Dammann
Model: DTP 4536 on carrier vehicle DAMMANN-TRAC DT500
JKI Test report code: D - 1749

The equipment has been
designed as a built-on-sprayer for
the DAMMANN-TRAC DT500
and is connected to the carrier
vehicle at four support points.
The DAMMANN-TRAC has an all-wheel-drive, as well as all wheel compressed-air brakes and all wheel suspention by coil springs. The vehicle can be
ordered with track width between 1.8 m – 2.0 m.

Testing takes place according to the Technical Instructions for ENTAM-Tests
of Field Crop Sprayers (Rel.2 and 3). Obstacle give way device at the boom
was inspected after change in 2009. This procedure was developed by the
competent testing authorities of the European countries participating in ENTAM
and is based on the CEN standard EN 12761 „Agricultural and forestry
machinery – Plant protection equipment for the application of plant protection
products and liquid fertilisers“.

 
Images: Damman DTP 4536
Dammann DTP 4536